No items found.

Three different functions are implemented in a single module.
Dual Gate to Trigger converter with Gate input that activates Trigger output with rising or falling edge.
Clock divider (master or slave) with exact divisions of the clock signal into 1/2, 1/4, 1/8, 1/16, and 1/32. Reset input to restart the sequence.
Trigger to Gate converter with pulse width (PWM) adjustment and Control Voltage (CV) input.

Power supply: +12V, -12V.
Power consumption: 20mA at +12V, 20mA at -12V.
Trigger and Gate output signals: 10Vpp for each output.
Horizontal size: 14 HP.
Height size: 3U.
Depth: 35mm from the front panel to the 10-pin Molex connector. 50mm from the knobs to the Molex connector.

AltDoor

Module

AltDoor is a module with functions for managing activations (Gates and Triggers), it has three main functions: i) Gate to Trigger converter, ii) Clock Divider, and iii) Trigger to Gate converter.

135

Important Note for Purchases:

Estimated delivery time:

30 calendar days

Please be aware that your t-shirt order will only be approved if you purchase a minimum of 3 units, regardless of the specific designs or references chosen. It's essential for your cart to contain at least 3 t-shirts for ZanySignals to process and approve your order. Thank you for your understanding and cooperation!

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Three different functions are implemented in a single module.
Dual Gate to Trigger converter with Gate input that activates Trigger output with rising or falling edge.
Clock divider (master or slave) with exact divisions of the clock signal into 1/2, 1/4, 1/8, 1/16, and 1/32. Reset input to restart the sequence.
Trigger to Gate converter with pulse width (PWM) adjustment and Control Voltage (CV) input.

Power supply: +12V, -12V.
Power consumption: 20mA at +12V, 20mA at -12V.
Trigger and Gate output signals: 10Vpp for each output.
Horizontal size: 14 HP.
Height size: 3U.
Depth: 35mm from the front panel to the 10-pin Molex connector. 50mm from the knobs to the Molex connector.

Additional Information