No items found.

Dual Hat synthesizer (Channel A and B).
Each channel has 2 types of noise N1/N2 for A and N3/N4 for B.
AR envelope (Attack and Release) per channel.
Broad knob to define the Attack time of the envelope.
Control Voltage (CV) for the Release of the envelope for each channel.
Activation through Gate signal.
Selectable LP/HP filter for one of the channels (A or B). Control Voltage (CV) for the CutOff of the filter (CVF).
Filtered sound output through Shiny.

Power supply: +12V, -12V.
Power consumption: 40mA at +12V, 40mA at -12V.
Eurorack audio output signals: 10Vpp for each output.
Horizontal measurement: 18 HP.
Height measurement: 3U.
Depth: 35mm from the front panel to the 10-pin Molex connector. 50mm from the knobs to the Molex connector.

Shiny

Module

Shiny is a dual hi-hat synthesizer, sound generator for cymbals, and high frequencies for percussion rhythms with high-pitched tones. It has an intuitive and minimalist design for easy and fast use. For each channel (A or B), it has an AR envelope (Attack and Release) with parameters that can be modified by its knobs, four types of noise (two for each channel), Gate signal activation, Control Voltage (CV) for Release (R) and 3 independent outputs.

275

Important Note for Purchases:

Estimated delivery time:

30 calendar days

Please be aware that your t-shirt order will only be approved if you purchase a minimum of 3 units, regardless of the specific designs or references chosen. It's essential for your cart to contain at least 3 t-shirts for ZanySignals to process and approve your order. Thank you for your understanding and cooperation!

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Dual Hat synthesizer (Channel A and B).
Each channel has 2 types of noise N1/N2 for A and N3/N4 for B.
AR envelope (Attack and Release) per channel.
Broad knob to define the Attack time of the envelope.
Control Voltage (CV) for the Release of the envelope for each channel.
Activation through Gate signal.
Selectable LP/HP filter for one of the channels (A or B). Control Voltage (CV) for the CutOff of the filter (CVF).
Filtered sound output through Shiny.

Power supply: +12V, -12V.
Power consumption: 40mA at +12V, 40mA at -12V.
Eurorack audio output signals: 10Vpp for each output.
Horizontal measurement: 18 HP.
Height measurement: 3U.
Depth: 35mm from the front panel to the 10-pin Molex connector. 50mm from the knobs to the Molex connector.

Additional Information